2SA2202 no. a0583-1/4 applications dc / dc converters, relay drivers, lamp drivers, motor drivers, flash. features adoption of fbet, mbit processes. large current capacitance. low collector-to-emitter saturation voltage. high-speed switching. high allowable power dissipation. specifications absolute maximum ratings at ta=25 c parameter symbol conditions ratings unit collector-to-base voltage v cbo - -100 v collector-to-emitter voltage v ces - -100 v collector-to-emitter voltage v ceo - -100 v emitter-to-base voltage v ebo -- 7 v collector current i c -- 2 a collector current (pulse) i cp -- 3 a base current i b - -400 ma collector dissipation p c mounted on a ceramic board (250mm 2 ? 0.8mm) 1.3 w t c=25 c 3.5 w junction temperature tj 150 c storage temperature tstg - -55 to +150 c electrical characteristics at ta=25 c ratings parameter symbol conditions min typ max unit collector cutoff current i cbo v cb =--80v, i e =0a --1 a emitter cutoff current i ebo v eb =- -4v, i c =0a --1 a dc current gain h fe v ce =--5v, i c =--100ma 200 400 gain-bandwidth product f t v ce =--10v, i c =--500ma 300 mhz output capacitance cob v cb =--10v, f=1mhz 23 pf marking : rc continued on next page. sanyo semiconductors d ata sheet tokyo office tokyo bldg., 1-10, 1 chome, ueno, taito-ku, tokyo, 110-8534 japan ordering number : ena0583 d2706ea ti im tc-00000421 any and all sanyo semiconductor products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. consult with your sanyo semiconductor representative nearest you before using any sanyo semiconductor products described or contained herein in such applications. sanyo semiconductor assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all sanyo semiconductor products described or contained herein. 2SA2202 pnp epitaxial planar silicon transistor high-voltage switching applications
2SA2202 no. a0583-2/4 continued from preceding page. ratings parameter symbol conditions min typ max unit collector-to-emitter saturation voltage v ce (sat) i c =--1a, i b =--100ma --120 --240 mv base-to-emitter saturation voltage v be (sat) i c =--1a, i b =--100ma --0.85 --1.2 v collector-to-base breakdown voltage v (br)cbo i c =--10 a, i e =0a --100 v collector-to-emitter breakdown voltage v (br)ces i c =--100 a, r be =0 ? ?
2SA2202 no. a0583-3/4 cob -- v cb v be (sat) -- i c f t -- i c v ce (sat) -- i c collector current, i c -- a gain-bandwidth product, f t -- mhz collector-to-base voltage, v cb -- v output capacitance, cob -- pf collector current, i c -- a base-to-emitter saturation voltage, v be (sat) -- v collector current, i c -- a collector-to-emitter saturation voltage, v ce (sat) -- v a s o p c -- ta collector dissipation, p c -- w ambient temperature, ta -- c collector current, i c -- a collector-to-emitter voltage, v ce -- v h fe -- i c collector current, i c -- a dc current gain, h fe p c -- tc collector dissipation, p c -- w case temperature, tc -- c - -0.01 - -0.1 - -1.0 7 5 3 2 7 5 3 2 5 3 2 - -0.1 - -0.01 --1.0 --100 - -10 25 37 2 2 5 37 25 37 25 37 i cp = --3a 100ms < 10 s 10ms 1ms i c = --2a it11886 dc operation( t c=25 c ) dc operation( t a=25 c ) 500 s 100 s 20 060 40 80 100 140 120 160 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 it11870 0 0.2 0.4 0.6 0.8 1.6 1.0 1.2 1.3 1.4 20 060 40 80 100 140 120 160 it11869 7 3 100 2 2 5 1000 7 5 3 - -0.01 257 7 3 - -0.1 25 325 3 - -1.0 it11885 v ce = --10v mounted on a ceramic board (250mm 2 0.8mm) - -0.1 2 3 5 2 3 5 7 - -1.0 7 - -0.01 7 - -0.01 --0.1 23 57 23 57 23 5 - -1.0 ta =75 c -- 25 c it11882 i c / i b =10 t a=75 c 25 c - -25 c 1000 100 7 5 3 2 7 5 3 2 - -0.01 3 25 - -0.1 73 257 3 25 - -1.0 v ce = --5v it11881 25 c - -1.0 - -0.01 --0.1 --1.0 t a= --25 c 25 c 75 c 3 2 7 5 3 2 23 57 23 57 23 5 i c / i b =10 it11883 2 7 5 5 3 2 7 100 10 - -0.1 23 7 5237 5237 5 - -1.0 --10 --100 it11884 f=1mhz tc=25 c single pulse mounted on a ceramic board (250mm 2 0.8mm)
2SA2202 no. a0583-4/4 specifications of any and all sanyo semiconductor products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. to verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. sanyo semiconductor co., ltd. strives to supply high-quality high-reliability products. however, any and all semiconductor products fail with some probability. it is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. when designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. in the event that any or all sanyo semiconductor products (including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be exported without obtaining the export license from the authorities concerned in accordance with the above law. no part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of sanyo semiconductor co., ltd. any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. when designing equipment, refer to the "delivery specification" for the sanyo semiconductor product that you intend to use. information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. sanyo semiconductor believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. ps this catalog provides information as of december, 2006. specifications and information herein are subject to change without notice.
|
